Pitney Bowes DA500, DA550 manual Table of Contents

Table of Contents

Setting Up a Job		3-4
1. Set the Separator Gap		3-7
2.	Center the Wireframe under the Material	3-9
3.	Set the Feed Angle	3-11
4.	Position the Sliding Fence	3-12
5.	Load Material	3-13
6.	Adjust the Position of the Feed Ramp	3-14
7.	Adjust the Media Thickness Lever	3-15
8.	Adjust the Exit Rollers	3-16
9.	Print a Test Piece	3-18
Chapter 4, Using the DA500/DA550 With Your
Computer
Printer Driver Software		4-2
Selecting Printer Properties		4-3
Using the Printer Properties Window		4-4
Selecting the DA500/DA550 Printer from a
Windows Application		4-14
Envelope Designer™ Plus		4-15
Chapter 5, Printer Maintenance
Preventive Maintenance		5-2
Cleaning		5-2
Print Quality Problems		5-2
Exit Rollers		5-3
Sensor		5-3
Floor Assembly and Top Cover		5-3
CMYK Printing Alignment (DA550 Only)		5-4
Chapter 6, Troubleshooting
Problems and Solutions		6-2
Feed Problems		6-2
Print Quality Problems		6-3
Interface Problems		6-4
Connector Diagram		6-5
Motor Problems		6-6
Barcode Problems		6-6
Other Problems		6-7

ii Pitney Bowes DA500/DA550 Operator Guide