Printer Maintenance • 5
Exit Rollers
Sensor
If the right and left exit rollers are misaligned, that is, contact printed surfaces, they can become contaminated with ink. Use water to dampen a soft cloth and remove the ink from the rollers.
A film and/or dust can build up on the sensors and couse misfeeds of the material. Lift the transport door and use compressed air to blow dust from the sensors. Cans of compressed air are available from many computer supply houses.
Sensor Location
Floor
Assembly and
Top Cover
Periodically wipe the cover and floor assembly (feed deck) with a soft cotton cloth, dampened with water only.
Pitney Bowes DA500/DA550 Operator Guide |
