2 • Setting Up the DA500/DA550 Printer
Important Safety Notes
Assembling
the DA500/
DA550
•Do not remove covers. The machine covers serve to enclose hazardous parts. If the machine has been dropped or has otherwise had the covers stressed in any way, report it to your Pitney Bowes Customer Service Representative.• Keep fingers, loose clothing, jewelry and long hair away from the moving parts.
•To reduce the risk of fire and/or electrical shock, do not attempt to disassemble this machine. If service is required, contact your Pitney Bowes Customer Service Representative.
•Use only Pitney Bowes approved supplied ink cartridges and cleaners. Read all instructions before attempting to operate the equipment.
In addition, follow any specific occupational safety and health standards for your workplace or area.
Once you've placed the printer in a suitable location, assemble the printer components in the following order:
NOTE: Do not plug the printer into the power source until you've completed steps
1.Install the wireframe input stacker (page
2.Install the sliding fence (page
3.Position the output stacker (page
4.Connect the parallel or serial cable (page
5.Attach the power cord and turn the printer ON (page
6.Install the ink jet cartridges (page
Instructions for installing each of these components start onthe next page.
* Requires use of a small
Pitney Bowes DA500/DA550 Operator Guide |