Setting Up the DA500/DA550 Printer • 2
Installing and
Removing the
Ink Jet
Cartridges
7. Install the Ink Jet Cartridges (Color & Black).
The printer uses Ink Jet Cartridges for printing. You must install a black only cartridge (DA500), or a black and a color cartridge (DA550), before you can print. To begin:
1.With the printer on, press the On Line key until the display reads OFF LINE.
2.Open the Transport Door of the printer.
3.Press the Cartridge+ key on the control panel to move the carriage to the middle of the printer.
4.Remove the color (DA550 only) or black cartridge (both models) from its shipping container by peeling the top cover off. Be careful not to touch the copper ribbon.
WARNING! The ink in the cartridge may be harmful if swallowed. Keep new and used cartridges out of reach of children. Discard empty cartridges immediately.
5.Gently remove the tape covering the ink nozzles on the print cartridge. Be careful not to touch the copper nozzles.
6.Gently insert the cartridge (color to the right, black to the left) into the carriage at approximately a 20 degree angle with copper strip to the bottom and in first.
Pitney Bowes DA500/DA550 Operator Guide |
