Appendix B • Specifications
Equipment Specifications (continued)
Stacker Capacity
Input Stacker: 200 #10 Envelopes
Output Stacker: 150 #10 Envelopes
Effective Print Area
The printable width is 9.4 inches measured from the right side of the mailpiece. The printable height is 15 inches measured from the bottom edge of the mailpiece. See the figure below.
Trailing Edge (Top) | Flap on opposite side |
FeedDirection |
|
Left | Right |
LeadingEdge(Bottom)
NOTES:
1.All edges are viewed from the front surface of the material.
2.Two clear zones, each 0.3 inches wide, are required on the mailpiece to allow clearance for the exit rollers.
3.Printing is allowed to the top edge of the media, however print quality will be degraded.
4.The lower 5/8 inch of the material is reserved for the lower right barcode when it is used.
Pitney Bowes DA500/DA550 Operator Guide |
