Pitney Bowes manual Assembling the DA500/ DA550, Attach the Wire Frame to the Printer

Setting Up the DA500/DA550 Printer • 2

Assembling the DA500/ DA550 (continued)

1.Attach the Wire Frame to the Printer.

1.Hook the bottom edge of the wire frame under the tabs in the frame slide.

2.Rotate the wire frame and insert the curved metal bar on the bottom of the frame into the height adjustment slot. See photos below.

Tabs Lock

Lever

Height Lock

Adjustment Knob

Slot

Curved	Wire Frame
metal Bar	Bottom
	Edge

3.Adjust the height of the wireframe so it's posi- tioned at about a 45 degree angle. Turn the lock knob on the side of the slide clockwise to hold the wireframe in position.

You can adjust both the height and side-to-side position of the wireframe to accommodate the size and type of the material you're running. We talk about this in the next chapter.

Pitney Bowes DA500/DA550 Operator Guide 2-7