Polycom ViewStation manual Service Profile Identifier, Isdn Video Numbers Screen

Chapter 2 Optional Configurations

Figure 2-9. ISDN Video Numbers Screen

1.Enter the STD or area code and press the down arrow on the remote control to continue to the next line.

2.Enter the ISDN phone number used for each line.

3.When complete, highlight the Save icon and press the SELECT button on the remote control.

Service Profile Identifier

The Service Profile Identifier screen (System Info > Admin Setup

>Video Network > IMUX > SPIDS) or SPIDs appears only if United States or Canada is selected as the country. If the ViewStation is connected to an internal phone system (PBX), a SPID may not need to be entered.

Note If the ViewStation is unable to find the SPIDs, check the network connection and verify that the ISDN numbers have been entered correctly.

•Enter the SPID numbers provided by the ISDN service provider.

•If the ViewStation is connected to a PBX, select the PBX icon. In some cases you may not need to locate SPIDs.

•To auto-detect SPID numbers, highlight the Start icon and press the SELECT button on the remote control.

© Polycom, Inc. 41 ViewStation User Guide