Polycom manual Multi-Point Setup MP Enabled ViewStations only

Chapter 2 Optional Configurations

Not Checked: The E.164 Dialing Extension is not displayed when a video call is initiated in H.323 calls.

Multi-Point Setup (MP Enabled ViewStations only)

The Multi-Pointsetup screen determines which mode the multi-point is used in. These modes are:

•Auto: The ViewStation automatically switches between discussion and presentation modes.

•Discussion: This mode is also called the continuous presence. Each site remains on the screen in a tiled arrangement.

•Presentation: The main presenter remains on the screen.

Full Screen: Whoever is speaking is viewed in full screen. When a new endpoint speaks, that endpoint appears full screen.

ViewStation 128

The Network Setup screen (System Info > Admin Setup > Video

Network) shown in Figure 2-24 provides three icons, which:

•Set Dialing Speeds

•Configure Video Network properties

•Set Call Preferences

Figure 2-24. ViewStation 128 ISDN Network Setup Screen

ViewStation User Guide 54 www.polycom.com