Roland V-Synth owner manual Panel Descriptions, Front Panel

Panel Descriptions

Front Panel

1

Volume Slider

Adjusts the overall volume that is output from the rear panel MAIN OUT jacks and PHONES jack.→ (Quick Start; p. 4)

2INPUT

[PEAK] (Peak Indicator)

This will light when the input volume is too high.

[LEVEL]

Adjusts the volume of the signal input through the INPUT jacks on the rear panel. → (p. 57)

3D BEAM

You can apply a variety of effects to sounds simply by moving your hand. → (p. 29)

Indicators (L, R)

If the D Beam controller is on, these will light when you move your hand over the controller.

[ON/OFF] (TIME TRIP, TIME, PITCH, ASSIGNABLE)

Switches the D Beam controller on/off. The effect to be controlled can be selected by pressing the relevant button.

TIME TRIP: Apply the Time Trip effect.

TIME: Apply the Time Control effect.

PITCH: Apply the Pitch Control effect.

ASSIGNABLE: Apply the effect that is specified for each sound.

4TIME TRIP PAD

By touching the pad surface with your finger you can apply a variety of effects to the sound.

Indicator

This will light when you touch the Time Trip Pad.

[TIME TRIP]

Switches to the Time Trip effect.

[ASSIGNABLE]

Switches to the effect that is specified for each patch.

[HOLD]

Switches hold on/off for the effect controlled by the Time Trip pad.

	1	2	3
	5
	4		8	10
			9
	6		7
	17
5	V-LINK

Enables or disables control of an externally connected V-LINK device.

6ASSIGNABLE CONTROL

You can assign a variety of parameters and functions to the two knobs ([C1], [C2]), and use them to modify the sound in realtime.

→(p. 30)

7ARPEGGIO

Here you can control the arpeggiator.

[TEMPO]

Adjusts the tempo of the arpeggios.

[ON/OFF]

Switches the Arpeggiator on/off.

[HOLD]

Switches the Arpeggiator hold on/off.

12