Roland V-Synth owner manual TT Pad/Knob

Settings Common to All Modes (System Mode)

KBD

KBD Sens (Keyboard Sensitivity)

Adjusts the keyboard’s touch.

Value

LIGHT: Light weight synthesizer keyboard like

MEDIUM: Standard

HEAVY: Acoustic piano simulation

KBD Velocity (Keyboard Velocity)

Specifies the velocity value that will be transmitted when you play the keyboard. If you want actual keyboard velocity to be transmitted, set this to “REAL.” If you want a fixed velocity value to be transmitted regardless of how you play, specify the desired value (1–127).

Value: REAL, 1–127

After Sens (Aftertouch Sensitivity)

Specifies the Aftertouch sensitivity. Higher values will allow Aftertouch to be applied more easily. Normally you will leave this at “100.”

Value: 0–200

Local Sw (Local Switch)

The Local Switch determines whether the internal sound generator is disconnected (OFF) from the controller section (keyboard, pitch bend/modulation lever, knobs, buttons, Time Trip Pad, D Beam controller, pedal, and so on); or not disconnected (ON). Normally this is left “ON,” but if you wish to use the V-Synth’s keyboard and controllers to control only external sound modules, set it to “OFF.” Value: OFF, ON

Remote KBD Sw (Remote Keyboard Switch)

Set this parameter “ON” when you want to use an external MIDI keyboard instead of the V-Synth’s keyboard. In this case, the MIDI transmit channel of the external MIDI keyboard can be set to any channel. Normally you will leave this parameter “OFF.”

Turn this “ON” when you want to control the V-Synth from an external MIDI device when performing with the Arpeggiator (p. 24).

TT Pad/Knob

X Assign-XY

Specifies the MIDI controller number that will be transmitted by movements in the ‘X’ (horizontal) direction when the Time Trip pad is in XY mode.

Value

OFF: No message will be transmitted.

CC01–31,33–95:Controller numbers 1–31, 33–95

Y Assign-XY

Specifies the MIDI controller number that will be transmitted by movements in the ‘Y’ (vertical) direction when the Time Trip pad is in XY mode.

Value

OFF: No message will be transmitted.

CC01–31,33–95:Controller numbers 1–31, 33–95

X Assign-TT (X Assign-Time Trip)

Specifies the MIDI controller number that will be transmitted by movements in the ‘X’ (horizontal) direction when the Time Trip pad is in Time Trip mode.

Value

OFF: No message will be transmitted.

CC01–31,33–95:Controller numbers 1–31, 33–95

Y Assign-TT (Y Assign-Time Trip)

Specifies the MIDI controller number that will be transmitted by movements in the ‘Y’ (vertical) direction when the Time Trip pad is in Time Trip mode.

Value

OFF: No message will be transmitted.

CC01–31,33–95:Controller numbers 1–31, 33–95

For details on control change messages, refer to “MIDI Implementation” (p. 153).

78