Roland V-Synth Sens Matrix Control Sens, Destination 1, 2 Matrix Control Destination 1, MFX1-3 p

Creating a Patch

BEAM-L:D Beam controller (left)

BEAM-R:D Beam controller (right)

KNOB1: Assignable Controller ([C1])

KNOB2: Assignable Controller ([C2])

VELO: Velocity (pressure you press a key with)

KEYF: Note Number

Sens (Matrix Control Sens)

Sets the amount of the Matrix Control’s effect that is applied. If you wish to modify the selected parameter in a positive (+) direction – i.e., a higher value, toward the right, or faster etc. – from its current setting, select a positive (+) value. If you wish to modify the selected parameter in a negative (-) direction – i.e., a lower value, toward the left, or slower etc. – from its current setting, select a negative (-) value. When both positive and negative are selected, the changes are greater as the value increases. Set it to “0” if you don’t want this effect.

Value: -63– +63

Destination 1, 2 (Matrix Control Destination 1, 2)

Specifies the parameters that will be controlled by the matrix controllers. When not controlling parameters with the Matrix Control, set this to “OFF.” Up to two parameters can be specified for each Matrix Control, and controlled simultaneously.

Value

You can control the following parameters. For details on each parameter, refer to the corresponding reference page.

In this manual, Parameters that can be controlled using the Matrix Control are marked with a “H.”

OSC1/2-PITCH:Oscillator Pitch (p. 43)

OSC1/2-TIME/PW:Time/Pulse Width (p. 44)

OSC1/2-FORMA/FAT:Formant/Fat (p. 44, p. 45)

OSC1/2-LVL:Level (p. 45)

OSC1/2-PENV-ATK:Pitch Envelope Attack Time (p. 48)

OSC1/2-PENV-DCY:Pitch Envelope Decay Time (p. 48)

OSC1/2-PENV-REL:Pitch Envelope Release Time (p. 48)

OSC1/2-TENV-ATK:Time Envelope Attack Time (p. 48)

OSC1/2-TENV-DCY:Time Envelope Decay Time (p. 48)

OSC1/2-TENV-REL:Time Envelope Release Time (p. 48)

OSC1/2-FENV-ATK:Formant Envelope Attack Time (p. 48)

OSC1/2-FENV-DCY:Formant Envelope Decay Time (p. 48)

OSC1/2-FENV-REL:Formant Envelope Release Time (p. 48)

OSC1/2-AENV-ATK:Oscillator TVA Envelope Attack Time (p. 48)

OSC1/2-AENV-DCY:Oscillator TVA Envelope Decay Time (p. 48)

OSC1/2-AENV-REL:Oscillator TVA Envelope Release Time (p. 48)

OSC1/2-LFO-RATE:Oscillator LFO Rate (p. 49)

OSC1/2-LFO-PCH:Oscillator Pitch LFO Depth (p. 43)

OSC1/2-LFO-TM/PW:Time/Pulse Width LFO Depth (p. 44, p. 44)

OSC1/2-LFO-FR/FT:Formant/Fat LFO Depth (p. 44, p. 45)

OSC1/2-LFO-LVL:Oscillator Level LFO Depth (p. 45)

CSM1/2-PRM1: (p. 111)

CSM1/2-PRM2: (p. 111)

CSM1/2-ENV1-ATK:COSM Envelope Attack Time (p. 48)

CSM1/2-ENV1-DCY:COSM Envelope Decay Time (p. 48)

CSM1/2-ENV1-REL:COSM Envelope Release Time (p. 48)

CSM1/2-ENV2-ATK:COSM Envelope Attack Time (p. 48)

CSM1/2-ENV2-DCY:COSM Envelope Decay Time (p. 48)

CSM1/2-ENV2-REL:COSM Envelope Release Time (p. 48)

CSM1/2-LFO-RATE:COSM LFO Rate (p. 49)

CSM1/2-LFO-PRM1: (p. 111)

CSM1/2-LFO-PRM2: (p. 111)

TVA-LVL:Level (p. 47)

TVA-ENV-ATK:TVA Envelope Attack Time (p. 48)

TVA-ENV-DCY:TVA Envelope Decay Time (p. 48)

TVA-ENV-REL:TVA Envelope Release Time (p. 48)

TVA-LFO-RATE:TVA LFO Rate (p. 49)

TVA-LFO-LVL:Level LFO Depth (p. 47)

TVA-LFO-PAN:Pan LFO Depth (p. 47)

MFX-SEND:MFX Send Level (p. 50)

CHO-SEND:Chorus Send Level (p. 50)

REV-SEND:Reverb Send Level (p. 50)

MFX1–3: (p. 116)

TVA-PAN:Pan (p. 47)

When you touch <List>, the Destination List window will appear, allowing you to select the Matrix Control Destination from the list.

Creating a Patch

39