Roland V-Synth 31 Enh→ Cho/Flg Enhancer→ Chorus/Flanger, 32 Enh→ Delay Enhancer→ Delay, 132

Effects List

31:Enh→ Cho/Flg (Enhancer→ Chorus/Flanger)

This effect connects Enhancer and either Chorus or Flanger in series.

L		Chorus/	2-Band
	Enhancer
R		Flanger	EQ

Parameter	Value	Description
Enhan Sens #1	0–127	Sensitivity of the enhancer
Enhan Frequen-	0–127	Sets the lower limit of the fre-
cy		quencies to which the enhance-
		ment effect is added.
Enhan Mix Lev-	0–127	Level of the overtones generated
el		by the enhancer
Enhan Level	0–127	Volume of the enhancer sound
Mod Mode	CHORUS,	Selects whether to use chorus or
	FLANGER	flanger.
Mod Rate #2	0.05–10.0 Hz,	Adjusts the speed of modulation
	note	for the chorus or flanger.
Mod Depth	0–127	Adjusts the depth of modulation
		for the chorus or flanger.
Mod Phase	0–180 deg	Sets how the chorus or flanger
		sound is spread.
Mod Pre Delay	0–50.0 ms	Adjusts the delay time from the
		direct sound until the chorus or
		flanger sound is heard.
Mod Feedback	-98– +98 %	Adjusts the proportion of the ef-
		fect sound that is fed back into
		the effect. Negative (-) settings
		will invert the phase.
Xover LowFreq	50–4000 Hz	Attenuates the effect in the
		range below the specified fre-
		quency.
Xover Low Gain	-36–0 dB	Specifies how greatly the low
		range will be attenuated.
Xover HiFreq	2000–20000 Hz	Attenuates the effect in the
		range above the specified fre-
		quency.
Xover Hi Gain	-36–0 dB	Specifies how greatly the high
		range will be attenuated.
Mod Level	0–127	Volume of the chorus or flanger
		sound.
Ps Low Freq	50–4000 Hz	Frequency of the low range
Ps Low Gain	-15– +15 dB	Gain of the low range
Ps Hi Freq	2000–20000 Hz	Frequency of the high range
Ps Hi Gain	-15– +15 dB	Gain of the high range

32: Enh→ Delay (Enhancer→ Delay)

This effect connects an Enhancer and a Delay in series.

L		2-Band
Enhancer	Delay
		EQ
R

Parameter	Value	Description
Enhan Sens #1	0–127	Sensitivity of the enhancer
Enhan Frequen-	0–127	Sets the lower limit of the fre-
cy		quencies to which the enhance-
		ment effect is added.
Enhan Mix Lev-	0–127	Level of the overtones generated
el		by the enhancer
Enhan Level	0–127	Volume of the enhancer sound
Delay Time	0–1300 ms, note	Adjusts the delay time from the
		direct sound until the delay
		sound is heard.
Delay Feedback	-98– +98 %	Adjusts the proportion of the de-
#2		lay sound that is fed back into
		the effect. Negative (-) settings
		will invert the phase.
Low Damp Freq	50–4000 Hz	Adjusts the frequency below
		which sound fed back to the ef-
		fect will be cut.
		The Low Damp function damps
		the low frequency band of the
		delay sound quicker than other
		bands, which makes for a clearer
		delay effect.
Low Damp	-36–0 dB	Degree of Low Damp
Gain
Hi Damp Freq	2000–20000 Hz	Adjusts the frequency above
		which sound fed back to the ef-
		fect will be cut.
		High Damp, by attenuating the
		higher frequencies first, makes
		the delay sound more natural.
Hi Damp Gain	-36–0 dB	Degree of High Damp
Delay Level	0–127	Volume of the delay sound.
Ps Low Freq	50–4000 Hz	Frequency of the low range
Ps Low Gain	-15– +15 dB	Gain of the low range
Ps Hi Freq	2000–20000 Hz	Frequency of the high range
Ps Hi Gain	-15– +15 dB	Gain of the high range

132