Roland V-Synth owner manual Resampling, Setup Settings, Sampling General, Sampling Type

Models: V-Synth

1 180
Download 180 pages 53.51 Kb
Page 60
Image 60

Creating and Editing Samples (Sample Mode)

Deleting a Sample (SAMPLE Delete)

1.Access the SAMPLE Top screen (p. 56).

2.Touch <> in the upper right of the screen.

A pulldown menu appears.

3.In the pulldown menu, touch <SAMPLE Delete>.

The SAMPLE Delete List window appears.

4.From the list, select the sample that you want to delete.

Either turn the VALUE dial or use [INC/+][DEC/-] to select a patch. You can also select a patch by touching it on the display.

Each screen in the SAMPLE Delete List window shows a group of 16 samples. To view other samples, touch <017-032>–<241- 256>, located at either side of the screen. To view higher- numbered samples, touch <257-512>–<769-999>, located at the bottom of the screen.

5.Touch <Execute>.

The selected sample will be deleted.

6.If you want to continue deleting other samples, repeat steps 4 and 5.

7.Press [EXIT].

The SAMPLE Delete List window closes.

Resampling

The V-Synth is able to resample samples from its internal memory. This is called resampling. In actuality, the sounds that are output from the rear panel MAIN OUT L(MONO), R jacks are sampled.

For example, you could sample multiple samples played simultaneously, and record them as a single sample. You can conserve voices in this way.

Pre Gain

 

INPUT

Sampling

Pre-FX

Sound

OUTPUT

Effect

Generator

 

Before you enter Resampling mode, make settings so that you can play the sample(s) you wish to resample.

The resampling procedure is essentially the same as the “Sampling Procedure” described in the preceding section. However, please be aware of the following points.

You must set the Input Source in the SAMPLING General screen to “RESAMPL.”

To adjust the sampling level, adjust the setup Pre-gain (p. 61) and the pre-effect Output Level (p. 61).

Setup Settings

SAMPLING General

Sampling Type

Select the type of sampling.

Value

STEREO L R: Sample in stereo.

MONORAL MIX: Mix the signals input to L and R, and sample in

monaural.

MONORAL L: Sample the L input signal in monaural.

MONORAL R: Sample the R input signal in monaural.

60

Page 60
Image 60
Roland V-Synth owner manual Resampling, Setup Settings, Sampling General, Sampling Type