Roland V-Synth owner manual Adjusting the Sensitivity of the Touch Screen, Touch Calibration

Adjusting the Sensitivity of the

Touch Screen/Time Trip Pad/D

Beam Controller (Calibration

Mode)

Displaying the CALIBRATION MENU Screen

1.Press [MODE].

The V-SYNTH MODE MENU window appears.

fig.MODE_50

2.Touch <CALIBRATION>.

The CALIBRATION MENU screen appears.

fig.08-05_50

Other Functions

Adjusting the Sensitivity of the Touch Screen

Perform this adjustment if the touch panel no longer responds as

you expect.

1.In the CALIBRATION MENU screen, touch <TOUCH SCREEN>.

The T SCREEN CALIBRATION screen appears.

fig.08-06_50

2.Touch the center of “+” symbol indicated by the square

symbol in the screen, in the following order: left → top → right → bottom.

When you have touched all four points, the screen will close, and the sensitivity of the touch screen will be calibrated.

Other Functions

99