Roland V-Synth owner manual USB Setup

Settings Common to All Modes (System Mode)

Rx Sys-Ex (Receive System Exclusive Switch)

Specifies whether System Exclusive messages will be received (ON) or not (OFF).

Value: OFF, ON

Tx Edit (Transmit Edit Data Switch)

Specify whether changes you make in the settings of a patch will be transmitted as system exclusive messages (ON), or will not be transmitted (OFF).

Value: OFF, ON

Clock Out

Specifies whether MIDI clock will be transmitted (ON) or not (OFF). Value: OFF, ON

USB Setup

Touch <USB Setup>, and a window like the following will appear.

Touch <OK> to apply the settings of this window, or touch <Cancel> to cancel and close the window.

USB Mode

Selects the mode in which the USB connector will be used.

Available Settings

Storage: Storage mode. Select this if you want to transfer files.

MIDI: MIDI mode. Select this if you want to exchange MIDI messages with a sequencer or other program.

You must switch the USB Mode before you connect the V-Synth to your computer via the USB cable. If you change this setting while the V-Synth is connected, the computer may fail to recognize it correctly.

For details on connections to your computer in each USB Mode, refer to “Connecting Your Computer Via USB (USB Mode).”

USB-MIDI Thru Sw (USB-MIDI Thru Switch)

When USB Mode is set to “MIDI,” this switch specifies whether MIDI messages received at the MIDI connector will be re- transmitted from the MIDI OUT connector (ON) or not (OFF). Value: OFF, ON

MIDI OUT	MIDI IN	USB OUT	USB IN
		Sound
		Generator
		Section
Controller Section		Local Switch
			V-Synth

USB-MIDI Thru Sw=OFF

MIDI OUT	MIDI IN	USB OUT	USB IN
		Sound
		Generator
		Section
Controller Section		Local Switch
			V-Synth

USB-MIDI Thru Sw=ON

76