Roland V-Synth owner manual 155, Identity Request Message, Master Volume, Master Fine Tuning

●MONO (Controller number 126)

Status	2nd byte	3rd byte
BnH	7EH	mmH
n = MIDI channel number:		0H - FH (ch.1 - 16)
mm = mono number:		00H - 10H (0 - 16)

*The same processing will be carried out as when All Notes Off is received.

●POLY (Controller number 127)

Status	2nd byte	3rd byte
BnH	7FH	00H

n = MIDI channel number: 0H - FH (ch.1 - 16)

*The same processing will be carried out as when All Notes Off is received.

■System Realtime Message

●Active Sensing

Status

FEH

*When Active Sensing is received, the unit will begin monitoring the intervals of all further messages. While monitoring, if the interval between messages exceeds 420 ms, the same processing will be carried out as when All Sounds Off, All Notes Off and Reset All Controllers are received, and message interval monitoring will be halted.

■System Exclusive Message

Status	Data byte	Status
F0H	iiH, ddH, ......,eeH	F7H
F0H:	System Exclusive Message status
ii = ID number:	an ID number (manufacturer ID) to indicate the manufacturer whose
	Exclusive message this is. Roland’s manufacturer ID is 41H.
	ID numbers 7EH and 7FH are extensions of the MIDI standard;
	Universal Non-realtime Messages (7EH) and Universal Realtime
	Messages (7FH).
dd,...,ee = data:	00H - 7FH (0 - 127)
F7H:	EOX (End Of Exclusive)

Of the System Exclusive messages received by this device, the Universal Non-realtime messages and the Universal Realtime messages and the Data Request (RQ1) messages and the Data Set (DT1) messages will be set automatically.

●Universal Non-realtime System Exclusive Messages

❍Identity Request Message

Status	Data byte	Status
F0H	7EH, dev, 06H, 01H	F7H
Byte	Explanation
F0H	Exclusive status
7EH	ID number (Universal Non-realtime Message)
dev	Device ID (dev: 10H - 1FH, 7FH)
06H	Sub ID#1 (General Information)
01H	Sub ID#2 (Identity Request)
F7H	EOX (End Of Exclusive)

*When this message is received, Identity Reply message (p. 158) will be transmitted.

MIDI Implementation

●Universal Realtime System Exclusive Messages

❍Master Volume

Status	Data byte	Status
F0H	7FH, 7FH, 04H, 01H, llH, mmH	F7H
Byte	Explanation
F0H	Exclusive status
7FH	ID number (universal realtime message)
7FH	Device ID (Broadcast)
04H	Sub ID#1 (Device Control)
01H	Sub ID#2 (Master Volume)
llH	Master Volume lower byte
mmH	Master Volume upper byte
F7H	EOX (End Of Exclusive)

*The lower byte (llH) of Master Volume will be handled as 00H.

*The Master Level parameter (SYSTEM Com Master) will change.

❍Master Fine Tuning

Status	Data byte	Status
F0H	7FH, 7FH, 04H, 03H, llH, mmH	F7H
Byte	Explanation
F0H	Exclusive status
7FH	ID number (universal realtime message)
7FH	Device ID (Broadcast)
04H	Sub ID#1 (Device Control)
03H	Sub ID#2 (Master Fine Tuning)
llH	Master Fine Tuning LSB
mmH	Master Fine Tuning MSB
F7H	EOX (End Of Exclusive)

mm, ll: 00 00H - 40 00H - 7F 7FH (-100 - 0 - +99.9 [cents])

*The Master Tune parameter (SYSTEM Com Master) will change.

❍Master Coarse Tuning

Status	Data byte	Status
F0H	7FH, 7FH, 04H, 04H, llH, mmH	F7
Byte	Explanation
F0H	Exclusive status
7FH	ID number (universal realtime message)
7FH	Device ID (Broadcast)
04H	Sub ID#1 (Device Control)
04H	Sub ID#2 (Master Coarse Tuning)
llH	Master Coarse Tuning LSB
mmH	Master Coarse Tuning MSB
F7H	EOX (End Of Exclusive)
llH:	ignored (processed as 00H)
mmH:	28H - 40H - 58H (-24 - 0 - +24 [semitones])

*The Master Key Shift parameter (SYSTEM Com Master) will change.

Appendices

155