Roland V-Synth MID 2 Gain, High Freq High Frequency, High Gain, Band EQ 4-Band Equalizer Switch

Settings Common to All Modes (System Mode)

EQ	MID 2 Gain
fig.05-02_50	Adjusts the gain of the middle range 1. Positive (+) settings will
	emphasize the middle range 2.
	Value: -15–+15 dB

	High Freq (High Frequency)
	Selects the frequency of the high range.
	Value: 2000, 4000, 5000, 6300, 8000, 10000, 12500, 16000, 20000 Hz
	HIGH Gain
	Adjusts the gain of the high frequency. Positive (+) settings will
	emphasize the high-frequency range.
4 Band EQ (4-Band Equalizer Switch)	Value: -15– +15 dB
	TOTAL Gain
Switch the 4-Band equalizer on/off.
Value: OFF, ON	Adjusts the total gain.
LOW Freq (Low Frequency)	Value: -15– +15 dB
Selects the frequency of the low range.	MIDI/USB
Value: 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1000,	fig.05-03_50
1250, 1600, 2000, 2500, 3150, 4000 Hz
LOW Gain
Adjusts the gain of the low frequency. Positive (+) settings will
emphasize the low-frequency range.
Value: -15– +15 dB
MID 1 Q
Adjusts the width of the middle range 1. Set a higher value for Q to
narrow the range to be affected.
Value: 0.5, 0.7, 1.0, 2.0, 4.0, 8.0
	Device ID (Device ID Number)
MID 1 Freq (Mid 1 Frequency)
	When you want to transmit or receive System Exclusive messages,
Selects the frequency of the middle range 1.
	set this parameter to match the Device ID number of the other MIDI
Value: 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1000,
	device.
1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000, 10000, 12500,
	Value: 17–32
16000, 20000 Hz
MID 1 Gain	Clock Source
	The LFO cycle or multi-effects changes can be synchronized to a
Adjusts the gain of the middle range 1. Positive (+) settings will
	clock (tempo). When this is used by the patch, this Clock Source
emphasize the middle range 1.
	setting determines the clock which will be used.
Value: -15–+15 dB
	Value
MID 2 Q	INTERNAL: The Patch Tempo will be used.
Adjusts the width of the middle range 2. Set a higher value for Q to	EXTERNAL: Synchronize to the clock of an external sequencer.
narrow the range to be affected.	Rx PC (Receive Program Change Switch)
Value: 0.5, 0.7, 1.0, 2.0, 4.0, 8.0	Specifies whether Program Change messages will be received (ON)
MID 2 Freq (Mid 2 Frequency)	or not (OFF).
Selects the frequency of the middle range 2.	Value: OFF, ON
Value: 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1000,	Rx Bank (Receive Bank Select Switch)
1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000, 10000, 12500,	Specifies whether Bank Select messages will be received (ON) or not
16000, 20000 Hz
	(OFF).
	Value: OFF, ON

Settings Common to All Modes (System Mode)

75