Roland V-Synth Windows Users, Windows 98/98SE Users, Windows XP/2000/Me or later Users

6.Touch <OK>.

7.If a WARNING window like the following appears, touch

<ACCEPT> to close the window.

fig.07-01_50

8.In the lower right of the SYSTEM Com MIDI/USB screen, touch <Write> to save the system settings.

For the rest of the procedure, read either “Windows Me/2000/ XP users” or “Macintosh users” as appropriate.

Windows users: Continue reading from this page.

Macintosh users: Read from page 93.

Windows Users

●Windows 98/98SE Users

You must install the driver from the included CD-ROM into your computer. Be sure to read the Readme file on the CD-ROM before installation.

→\Storage\Wn98\Readme_e.htm

●Windows XP/2000/Me or later Users

Installation is completely automatic.

Connecting to Your Computer via USB (USB Mode)

Connecting the V-Synth to Your

Computer

1.Make sure that the power of the V-Synth is turned off.

2.Start up your computer.

3.Connect the V-Synth and your computer using a USB cable.

fig.07-02.e

USB Connector

Computer

USB cable

USB

V-Synth

4.Turn on the power of V-Synth.

5.If you are using a PC card, insert that PC card into the PC CARD slot.

6.Press [MODE] to access the V-SYNTH MODE MENU window.

7.Touch <USB>.

The USB Storage screen appears.

fig.07-03_50

If the USB Mode (p. 76) is set to “MIDI,” you will be unable to select <USB> in the V-SYNTH MODE MENU window. Set the USB Mode to “Storage.”

Connecting to Your Computer via USB (USB Mode)

91