Roland V-Synth owner manual Auditioning the Save-Destination Patch Compare, Palette p

•By touching <Compare> you can check the save-destination patch (Compare function).

•When you touch <List>, the PATCH List window will appear,

allowing you to select the save-destination patch from the list.

fig.03-05_50

5.Touch <Execute> to execute the Save operation.

Auditioning the Save-Destination Patch (Compare)

Before you save a patch, you can audition the patch which currently occupies the save destination to make sure that it is one you don’t mind overwriting. This can help prevent important patches from being accidentally overwritten and lost.

1.Follow the procedure in “Saving Patches (PATCH Write)” through step 4 to select the save destination.

2.Touch <Compare> to turn it on.

Now you can play the patch that is in the currently selected save

destination.

fig.03-06_50

3.Play the keyboard to sound the save destination patch, then check whether you really want to overwrite it.

The patch auditioned using the Compare function may sound slightly different than when it is played normally.

4.If you wish to change the save destination, re-specify the save-destination patch by using the VALUE dial.

5.Touch <Execute> to execute the Save operation.

Creating a Patch

Registering a Favorite Patch (Patch Palette)

You can bring together your favorite and most frequently used patches in one place by registering them into the patch palette. By using this function you can rapidly select favorite patches from internal memory. You can register a total of 64 sounds (8 sounds x 8 banks) as favorite sounds.

For details on how to select patches that are registered in the	Patch
Palette)” (p. 22).
patch palette, refer to “Selecting Favorite Patches (Patch
1. Access the PATCH PLAY screen, and select the patch that	a
	Creating
bank in which you wish to register the sound.
you wish to register (p. 21).
2. Hold down [BANK] and press a NUMBER [1]–[8] to select the
When you press [BANK], the indicator of the currently selected
bank button (NUMBER [1]–[8]) will blink.
If you continue pressing [PATCH ASSIGN] or [BANK], the
PATCH PALETTE window will appear. In this window you can
view the patches that are registered in the currently selected
bank.
3. Hold down [PATCH ASSIGN] and press a NUMBER [1]–[8] to
select the button at which you wish to register the sound.
When the display indicates “Completed!,” registration has been
completed.

35