Roland V-Synth Saving Project on Disk Save Project, Delete Unneeded Files Clean Project

Saving Project on Disk (Save Project)

Save the project in the work area to disk.

1.Access the DISK UTILITY MENU screen (p. 83).

2.Touch <Save Project>.

The Disk Save Project screen appears.

fig.06-06_50

3.To save to internal memory, touch <Int>. To save to PC card, touch <Card>. Then select the save-destination project.

If you want to save the data as a new project, touch <New Project>. The PROJECT Name window will appear. Assign a name to the new project.

4.Touch <OK>.

A WARNING window like the following appears.

fig.06-07_50

If you want to cancel the procedure at this point, touch <CANCEL>.

5.Touch <EXECUTE> to execute the operation.

Disk-Related Functions (Disk Mode)

Delete Unneeded Files (Clean Project)

This lets you clean up the contents of the disk by deleting files that cannot be used by the V-Synth or waves that are not used by patches. Executing this operation can increase the free space available on the disk. If there are any unused patch/wave numbers, subsequent patches/waves will be automatically renumbered forward.

1.Access the DISK UTILITY MENU screen (p. 83).

2.Touch <Clean Project>.

The DISK Clean Project screen appears.

fig.06-08_50

		(Disk Mode)
		Functions
	If you want to cancel the procedure at this point, touch
	<CANCEL>.	Related-
3. Touch <EXECUTE> to execute the operation.
Importing Individual Patch or		Disk
Wave Files (Import Files)

You can import individual patch or wave files or folders into the work area of the V-Synth.

The data will be imported into unused patch/wave numbers. Importing is not possible if there are no empty patches or waves.

1.Access the DISK UTILITY MENU screen (p. 83).

2.Touch <Import Files>.

The Disk Import Files screen appears.

fig.06-09_50

3.Touch <Patch> if you want to import a patch, or touch <Wave> if you want to import a wave.

85