Roland V-Synth Stereo Pitch Shifter, 28 OD/DS→ Cho/Flg Overdrive/ Distortion→ Chorus/Flanger, 130

Effects List

27: Stereo Pitch Shifter

This effect features two pitch shifters arranged in parallel, making it stereo compatible. It can shift the pitch of the input signal up to one octave up or down.

L
A	2-Band
Stereo Pitch Shifter
	EQ
B
R

Parameter	Value	Description
Input Mode	MONO, STE-	Selects either stereo input or
	REO	monaural input.
Grade	1–5	Sets the grade of the effect
		sound.
		The higher the value is set, the
		more natural-sounding can be
		obtained; however, this increas-
		es the delay from the source
		sound as well.
Coarse Pitch A/	-12– +12 semi-	Specifies the pitch shift amount
B #1/#2	tone	in semitones for pitch shift A or
		B.
Fine Pitch A/B	-100– +100 cent	Adjusts the pitch shift amount in
		2-cent units (1 cent = 1/100 of a
		semitone) for pitch shift A or B.
Pre Delay A/B	0–500 ms	Adjusts the delay time from the
		direct sound until the pitch shift
		A or B sound is heard.
Level A/B	0–127	Volume of the pitch shift A or B
		sound.
Pan A/B	L63–63R	Pan of the pitch shift A or B
		sound.
Direct Level	0–127	Volume of the direct sound.
Feedback #3	-98– +98 %	Adjusts the proportion of the
		pitch shift sound that is fed back
		into the effect. Negative (-) set-
		tings will invert the phase.
Low Damp Freq	50–4000 Hz	Adjusts the frequency below
		which sound fed back to the ef-
		fect will be cut.
		The Low Damp function damps
		the low frequency band of the
		pitch shift sound quicker than
		other bands.
Low Damp	-36–0 dB	Degree of Low Damp
Gain
Hi Damp Freq	2000–20000 Hz	Adjusts the frequency above
		which sound fed back to the ef-
		fect will be cut.
		High Damp, by attenuating the
		higher frequencies first.
Hi Damp Gain	-36–0 dB	Degree of High Damp
Ps Low Freq	50–4000 Hz	Frequency of the low range
Ps Low Gain	-15– +15 dB	Gain of the low range
Ps Hi Freq	2000–20000 Hz	Frequency of the high range
Ps Hi Gain	-15– +15 dB	Gain of the high range

28:OD/DS→ Cho/Flg (Overdrive/ Distortion→ Chorus/Flanger)

This effect connects either Overdrive or Distortion and either Chorus

or Flanger.

L
Overdrive/	Chorus/	2-Band
Distortion	Flanger	EQ
R

Parameter	Value	Description
Distortion	OD, DS	Selects whether to use overdrive
Mode		(OD) or distortion (DS).
Drive #1	0–127	Degree of distortion
Amp Sim Sw	OFF, ON	Turns the amp simulator on/off.
Amp Type	SMALL,	Type of guitar amp
	BUILT-IN, 2-	SMALL: small amp
	STACK, 3-	BUILT-IN: single-unit type amp
	STACK	2-STACK: large double stack
		amp
		3-STACK: large triple stack amp
Distortion Level	0–127	Volume of the overdrive or dis-
		tortion sound.
Mod Mode	CHORUS,	Selects whether to use chorus or
	FLANGER	flanger.
Mod Rate #2	0.05–10.0 Hz,	Adjusts the speed of modulation
	note	for the chorus or flanger.
Mod Depth	0–127	Adjusts the depth of modulation
		for the chorus or flanger.
Mod Phase	0–180 deg	Sets how the chorus or flanger
		sound is spread.
Mod Pre Delay	0–50.0 ms	Adjusts the delay time from the
		direct sound until the chorus or
		flanger sound is heard.
Mod Feedback	-98– +98 %	Adjusts the proportion of the ef-
		fect sound that is fed back into
		the effect. Negative (-) settings
		will invert the phase.
Xover LowFreq	50–4000 Hz	Attenuates the effect in the
		range below the specified fre-
		quency.
Xover Low Gain	-36–0 dB	Specifies how greatly the low
		range will be attenuated.
Xover HiFreq	2000–20000 Hz	Attenuates the effect in the
		range above the specified fre-
		quency.
Xover Hi Gain	-36–0 dB	Specifies how greatly the high
		range will be attenuated.
Mod Level	0–127	Volume of the chorus or flanger
		sound.
Ps Low Freq	50–4000 Hz	Frequency of the low range
Ps Low Gain	-15– +15 dB	Gain of the low range
Ps Hi Freq	2000–20000 Hz	Frequency of the high range
Ps Hi Gain	-15– +15 dB	Gain of the high range

130