Roland V-Synth owner manual Moving the Cursor, Editing a Value

Overview of the V-Synth

Moving the Cursor

A single screen or window displays multiple parameters or items for selection. To edit a parameter’s value, move the cursor to the value. To select an item, move the cursor to the item. The cursor is a black rectangle, and the parameter value or item you select with the cursor is highlighted (displayed in inverted colors).

Cursor

Cursor Buttons

Press [ ], [ ], [ ], or [ ] (the cursor buttons) to move the cursor.

[ ]: moves the cursor up.

[ ]: moves the cursor down.

[ ]: moves the cursor to the left.

[ ]: moves the cursor to the right.

Touch Screen

Directly touch a parameter value to move the cursor.

Editing a Value

To edit a value, you can use the VALUE dial, [INC/+] [DEC/-], or drag on the touch screen.

In each V-Synth screen, you can select a value using the cursor as described earlier, and modify its value.

Each parameter has its own range of possible values. You cannot set any value smaller than the minimum value or greater than the maximum value.

VALUE Dial

Turning the VALUE dial clockwise increases the value, and turning it counterclockwise decreases its value. Hold down [SHIFT] as you move the VALUE dial to increase value increments to make large value changes more quickly.

[INC/+] and [DEC/-]

Press [INC/+] to increase the selected value, and [DEC/-] to decrease it. Keep the button pressed for continuous adjustment. For faster value increases, keep [INC/+] pressed down and press [DEC/ -]. To decrease values quickly, keep [DEC/-] pressed down and press [INC/+].

Touch Screen

Touch a parameter value, and drag your finger up/down or left/ right. Dragging upward or to the right increases the value, and dragging downward or to the left decreases the value.

20