Roland V-Synth owner manual Space Chorus, Hexa Chorus, Analog Flanger, 126, Norm, Inv

Effects List

18: Space Chorus

This effect reproduces the sound of Roland’s SDD-320 spatial

expression effects. Greater breadth is added.

L	Space	2-Band
R	Chorus	EQ

Parameter	Value	Description
Mode	1, 2, 3, 4, 1+4,	Selects the way in the chorus
	2+4, 3+4	will change.
		The SDD-320 features four
		mode buttons for changing the
		effect. This setting determines
		which buttons are to be pressed.
		(“1+4” represents the condition
		when Buttons 1 and 4 are
		pressed simultaneously.)
Chorus Level #1	0–127	Volume level of the chorus
		sound
Ps Low Freq	50–4000 Hz	Frequency of the low range
Ps Low Gain	-15– +15 dB	Gain of the low range
Ps Hi Freq	2000–20000 Hz	Frequency of the high range
Ps Hi Gain	-15– +15 dB	Gain of the high range

19: Hexa Chorus

Hexa-chorus is a six-stage chorus which adds depth and spaciousness to the sound. (Six chorus sounds with different delay times are overlaid.) An equalizer is provided before (Pre) and after (Post) the hexa chorus.

L	2-Band	Hexa	2-Band
R	EQ	Chorus	EQ

Parameter	Value	Description
Pre Dly Time	0–50.0 ms	Adjusts the delay time from the
		direct sound until the chorus
		sound is heard.
Pre Dly Dev	0–50.0 ms	Specifies the differences in Pre
		Delay time for each of the chorus
		sounds
Rate #1	0.05–10.0 Hz,	Specifies the modulation fre-
	note	quency of the chorus sound.
Depth	0–127	Specifies the modulation depth
		of the chorus sound.
Depth Devia-	0–127	Specifies the difference in mod-
tion		ulation depth between each of
		the chorus sounds.

Parameter	Value	Description
Pan Deviation	L63–63R	Specifies the difference in stereo
		position between each of the
		chorus sounds.
		0: All of the chorus sounds will
		be panned to the center.
		L20/R20: each chorus sound
		will be placed in 30 degree inter-
		vals relative to the center posi-
		tion.
Chorus Level #2	0–127	Volume level of the chorus
		sound
Pre Low Freq	50–4000 Hz	Frequency of the low range (Pre)
Pre Low Gain	-15– +15 dB	Gain of the low range (Pre)
Pre Hi Freq	2000–20000 Hz	Frequency of the high range
		(Pre)
Pre Hi Gain	-15– +15 dB	Gain of the high range (Pre)
Ps Low Freq	50–4000 Hz	Frequency of the low range
Ps Low Gain	-15– +15 dB	Gain of the low range
Ps Hi Freq	2000–20000 Hz	Frequency of the high range
Ps Hi Gain	-15– +15 dB	Gain of the high range

20: Analog Flanger

This effect reproduces the sound of Roland’s SBF-325 analog flanger. You can get three different types of flanger sounds (adding a metallic swelling sound to the source sound) and chorus like effect.

L	Analog
R	Flanger

Parameter	Value	Description
Mode	FL1, FL2, FL3,	Sets the effect type.
	CHO	FL1: A general monaural flanger
		FL2: A stereo flanger that utiliz-
		es the stereo placement of the
		source sound
		FL3: A cross mix flanger that
		providing a more intense effect
		CHO: Chorus effect
Rate #1	0.02–5.00 Hz,	Sets the rate of the swelling of
	note	the flanger sound.
Depth #2	0–127	Specifies the modulation depth
		of the flanger sound.
Manual	0–127	Adjusts the center frequency to
		which the flanger effect is ap-
		plied.
Feedback #3	0–127	Sets the intensity of the flanger’s
		effect.
		* When the mode is set to CHO,
		this setting will be ignored.
CH-R Mod	NORM, INV	Sets the phase of the right chan-
Phase		nel.
		This is usually set to Normal
		(NORM). Setting this to Invert
		(INV) inverts the phase of the
		modulation (rise and fall) in the
		right channel.
CH-L Phase	NORM, INV	Sets the phase of the left and
CH-R Phase		right channels when the source
		sound is mixed with the flang-
		ing sound.
		NORM: Positive phase (+)
		INV: negative phase (-)

126