Roland V-Synth owner manual Adjusting the Volume and Pan TVA

Adjusting the Volume and Pan (TVA)

TVA Switch ◆

Switches the TVA on/off.

Value: OFF, ON

TVA

fig.03-24_50

Level ★

Specifies the volume of the patch.

Value: 0–127

Level KF (Level Key Follow)

Use this parameter if you want the volume of the patch to change according to the key that is pressed. Relative to the volume at the C4 key (center C), positive (+) settings will cause the volume to rise for notes higher than C4, and negative (-) settings will cause the volume to fall for notes higher than C4. Larger settings will produce greater change.

Value: -200– +200

Lvl LFO Dp (Level LFO Depth) ★

Specifies how deeply the LFO will affect the volume of the patch. Value: -63– +63

Pan

Specifies the pan of the patch. “L64” is far left, “0” is center, and “63R” is far right.

Value: L64–0–63R

Creating a Patch

Pan KF (Pan Key Follow)

Use this parameter if you want key position to affect panning. Positive (+) settings will cause notes higher than C4 key (center C) to be panned increasingly further toward the right, and negative (-) settings will cause notes higher than C4 key (center C) to be panned toward the left. Larger settings will produce greater change.

Value: -200– +200

fig.Pan KF.e

Pan							Patcha
R						+50
						+100
o						0	Creating
						-50
L						-100	Key
C1	C2	C3	C4	C5	C6	C7

Pan LFO Dp (Pan LFO Depth) ★

Specifies how deeply the LFO will affect the pan.

Value: -63– +63

In this screen you can make settings for the envelope that affects the TVA. For details on envelope settings, refer to “Making Envelope Settings” (p. 48).

LFO

fig.03-25_50

In this screen you can make settings for the LFO that affects the TVA. For details on LFO settings, refer to “Making LFO Settings” (p. 49).

47