Roland V-Synth owner manual Link Settings V-LINK

Settings Common to All Modes (System Mode)

V-LINK Settings (V-LINK)

Tx

MIDI Channel (V-LINK MIDI Channel)

Specifies the channel used to transmit MIDI messages for V-LINK control.

Value: 1–16

Audio (V-LINK Audio Switch)

Specifies whether sound from the externally connected video device will be played (ON) or not played (OFF).

Value: OFF, ON

KBD Output (V-LINK Keyboard Output Fade Switch)

Specifies whether the video output from the video device will be stopped (ON) or will not be stopped (OFF) when you are not holding down a key.

Value: OFF, ON

Palette Local Sw (V-LINK Patch Palette Local Switch)

Specify whether you will press PATCH PALETTE NUMBER [1]–[8]

in V-Link mode to switch patches (ON) or not (OFF)

Value: OFF, ON

TT Pad/Knob

TTPad Local Sw (V-LINK Time Trip Pad Local Switch)

Specify whether the Time Trip pad and the internal sound generator

will be disconnected in V-Link mode (OFF) or not disconnected (ON).

Value: OFF, ON

X Assign-XY (V-LINK X Assign-XY)

Specify the V-Link function that will be controlled when you operate the Time Trip pad in the X (horizontal) direction in XY mode.

Value

OFF: The time trip pad will not be used.

PLAYBACK-SPEED: Playback speed

DISSOLVE-TIME:Dissolve time (time over which the image

switches)

AUDIO LEVEL: Volume during audio playback

COLOR-CB:Color Cb (color-difference signal)

COLOR-CR:Color Cr (color-difference signal)

BRIGHTNESS: Brightness

VFX1: Visual effects 1

VFX2: Visual effects 2

VFX3: Visual effects 3

VFX4: Visual effects 4

OUTPUT-FADE: Output fade

T-BAR: T bar

Y Assign-XY (Link Y Assign-XY)

Specify the V-Link function that will be controlled when you operate the Time Trip pad in the Y (vertical) direction in XY mode.

Value

OFF: The time trip pad will not be used.

PLAYBACK-SPEED: Playback speed

DISSOLVE-TIME:Dissolve time (time over which the image

switches)

AUDIO LEVEL: Volume during audio playback

COLOR-CB:Color Cb (color-difference signal)

COLOR-CR:Color Cr (color-difference signal)

BRIGHTNESS: Brightness

VFX1: Visual effects 1

VFX2: Visual effects 2

VFX3: Visual effects 3

VFX4: Visual effects 4

OUTPUT-FADE: Output fade

T-BAR: T bar

Assign-TT (V-LINK Assign-Time Trip)

Specify the V-Link function that will be controlled when you operate the Time Trip pad in Time Trip mode.

Value

OFF: The time trip pad will not be used.

TIME-TRIP: Time trip

Knob 1, 2 Local Sw (V-LINK Knob1, 2 Local Switch)

Specify whether the assignable controller knobs 1 or 2 will be disconnected from the internal sound generator in V-Link mode (OFF) or not disconnected (ON).

Value: OFF, ON

80