Roland V-Synth owner manual Multi Tap Delay, Reverse Delay, 123

12: Multi Tap Delay

The effect has five delays. Each of the Delay Time parameters can be specified as a note length of the selected tempo. You can also set the panning and level of each delay sound.

fig.MFX-12

Delay 1

L	Delay 2
	Multi Tap Delay	Delay 3	2-Band
			EQ
R	Delay 4
	Delay 5

Parameter	Value	Description
Delay 1–5	0–1300 ms, note	Specifies the delay time from the
		original sound until each delay
		sound (Delay 1/2/3/4/5) is
		heard.
Fbk Dly Time	0–1300 ms, note	Adjusts the delay time for the
		feedback sound
Feedback #1	-98– +98 %	Adjusts the proportion of the de-
		lay sound that is fed back into
		the effect. Negative (-) settings
		will invert the phase.
Delay 1–5 Level	0–127	Adjusts the volume of each de-
		lay sound (Delay 1/2/3/4/5)
Delay 1–5 Pan	L63–63R	Adjusts the pan of each delay
		sound (Delay 1/2/3/4/5)
Low Damp Freq	50–4000 Hz	Adjusts the frequency below
		which sound fed back to the ef-
		fect will be cut.
		The Low Damp function damps
		the low frequency band of the
		delay sound quicker than other
		bands, which makes for a clearer
		delay effect.
Low Damp	-36–0 dB	Degree of Low Damp
Gain
Hi Damp Freq	2000–20000 Hz	Adjusts the frequency above
		which sound fed back to the ef-
		fect will be cut.
		High Damp, by attenuating the
		higher frequencies first, makes
		the delay sound more natural.
Hi Damp Gain	-36–0 dB	Degree of High Damp
Ps Low Freq	50–4000 Hz	Frequency of the low range
Ps Low Gain	-15– +15 dB	Gain of the low range
Ps Hi Freq	2000–20000 Hz	Frequency of the high range
Ps Hi Gain	-15– +15 dB	Gain of the high range

Effects List

13: Reverse Delay

Adds the reverse of the input sound as the delay sound.

fig.MFX-13

L	Reverse	2-Band
R	Delay	EQ

Parameter	Value	Description
Threshold	0–127	pecify the input level at which
		the delay will begin to apply.
Rvs Dly Time	0–650 ms, note	Specifies the delay time from the
		original sound until the delay
		sound is heard.
Rvs Feedback	-98– +98 %	Adjusts the proportion of the re-
		verse delay sound that is fed
		back into the effect. Negative (-)
		settings will invert the phase.
Low Damp Freq	50–4000 Hz	Adjusts the frequency below
		which sound fed back to the ef-
		fect will be cut.
		The Low Damp function damps
		the low frequency band of the
		delay sound quicker than other
		bands, which makes for a clearer
		delay effect.
Low Damp	-36–0 dB	Degree of Low Damp
Gain
Hi Damp Freq	2000–20000 Hz	Adjusts the frequency above
		which sound fed back to the ef-
		fect will be cut.
		High Damp, by attenuating the
		higher frequencies first, makes
		the delay sound more natural.
Hi Damp Gain	-36–0 dB	Degree of High Damp
Balance	DRY100:0WET–	Volume balance between the di-
	DRY0:100WET	rect sound (DRY) and the effect
		sound (WET)
Ps Low Freq	50–4000 Hz	Frequency of the low range
Ps Low Gain	-15– +15 dB	Gain of the low range
Ps Hi Freq	2000–20000 Hz	Frequency of the high range
Ps Hi Gain	-15– +15 dB	Gain of the high range

Appendices

123