Roland V-Synth owner manual Boss Flanger, Step Flanger, 127

21: BOSS Flanger

This effect features a pair of the same flanger circuits used in the BOSS compact flangers, connected in parallel for stereo input. This adds a particular metallic-sounding modulation to the source sound.

fig.MFX-21

L	Flanger	2-Band
R		EQ

Parameter	Value	Description
Type	NORMAL, HI-	Selects the model of flanger sim-
	BAND	ulated.
		NORMAL: Normal type (BOSS
		BF-2)
		HI-BAND: High-Band type
		(BOSS HF-2). Setting HI-B raise
		the flanging sound one octave
		above that at the NORM.
Manual	0–127	Sets the center frequency for the
		effect.
Depth #1	0–127	Sets the depth of the swelling of
		the flanger sound.
Rate #2	0.05–10.0 Hz,	Adjusts the modulation speed of
	note	the flanger effect.
Resonance	0–127	Sets the intensity of the flanger’s
		effect.
		* If the Feedback Mode is
		CROSS, this setting is
		ignored.
Phase	0–180 deg	Specifies the spaciousness of the
		flanger sound.
Feedback Mode	NORMAL,	Specifies the input destination to
	CROSS	which the flanger sound will be
		returned.
		NORMAL: The left flanger
		sound will be returned to the left
		input, and the right flanger
		sound to the right input.
		CROSS: The left flanger sound
		will be returned to the right in-
		put, and the right flanger sound
		to the left input.
Feedback	-98– +98 %	This setting makes the flanging
		sound of each of right and left
		channels return to the input of
		the opposite channel. Negative
		(-) settings will invert the phase.
		* When the Feedback Mode is set
		to NORMAL, this setting will
		be ignored.
Cross Mix Level	-100– +100	This setting makes the flanging
		sound from each of the right and
		left channels mix it with the
		flanging sound of the opposite
		channel. Negative (-) settings
		will invert the phase.
Ps Low Freq	50–4000 Hz	Frequency of the low range
Ps Low Gain	-15– +15 dB	Gain of the low range
Ps Hi Freq	2000–20000 Hz	Frequency of the high range
Ps Hi Gain	-15– +15 dB	Gain of the high range

Effects List

22: Step Flanger

This is a flanger in which the flanger pitch changes in steps. The speed at which the pitch changes can also be specified in terms of a note-value of a specified tempo.

fig.MFX-22

L	Step	2-Band
R	Flanger	EQ

Parameter	Value	Description
Pre Dly Time	0–50.0 ms	Specifies the time delay from the
		original sound until the flanger
		sound is heard.
Rate #1	0.05–10.0 Hz,	Specifies the modulation fre-
	note	quency of the flanger sound.
Depth	0–127	Specifies the modulation depth
		of the flanger sound.
Feedback	-98– +98 %	Adjusts the proportion of the
		flanger sound that is fed back
		into the effect. Negative (-) set-
		tings will invert the phase.
Phase	0–180 deg	Specifies the spaciousness of the
		flanger sound.
Step Rate #2	0.05–10.0 Hz,	Specifies the frequency of pitch
	note	change.
Flanger Level	0–127	Volume of the flanger sound
Ps Low Freq	50–4000 Hz	Frequency of the low range
Ps Low Gain	-15– +15 dB	Gain of the low range
Ps Hi Freq	2000–20000 Hz	Frequency of the high range
Ps Hi Gain	-15– +15 dB	Gain of the high range

Appendices

127