Roland V-Synth Vocal Echo, Band Pass Delay, 124, Value Description, Delay Pan Type Values Dly

Effects List

14: Vocal Echo

This effect simulates a karaoke echo.

L
	LPF		ECHO		2-Band
					EQ
R
Parameter		Value		Description
Delay Time #1		0–650 ms, note		Adjusts the delay time from the
				direct sound until the delay
				sound is heard.
Pre LPF Freq		500–15000 Hz,		Sets the filter’s cutoff frequency
		THRU		(THRU: no filter is used)
Mod Rate		0.05–10.0 Hz,		Specifies the modulation speed
		note		of the modulation effect.
Mod Depth		0–127		Specifies the modulation depth
				of the modulation effect.
Diffusion		0–100		Specifies the spaciousness of the
				delay sound.
Feedback #2		-98– +98 %		Adjusts the proportion of the de-
				lay sound that is fed back into
				the effect. Negative (-) settings
				will invert the phase.
Hi Damp Freq		500–15000 Hz,		Adjusts the frequency above
		THRU		which sound fed back to the ef-
				fect will be cut.
				High Damp, by attenuating the
				higher frequencies first, makes
				the delay sound more natural.
Echo Level #3		0–127		Volume of the echo sound
Ps Low Freq		50–4000 Hz		Frequency of the low range
Ps Low Gain		-15– +15 dB		Gain of the low range
Ps Hi Freq		2000–20000 Hz		Frequency of the high range
Ps Hi Gain		-15– +15 dB		Gain of the high range

15: Band Pass Delay

This is a delay with a band pass filter (a filter that outputs only a specified frequency range) on each of five delays. A phaser is included before the delay. Phaser is an effect that adds a phase- shifted sound to the original sound to create time-varying change, modulating the sound.

Parameter		Value	Description
Phaser Manual		0–127	Specifies the center frequency at
			which the sound is modulated.
Phaser Rate		0.05–10.0 Hz,	Specifies the frequency of mod-
		note	ulation.
Phaser Depth		0–127	Specifies the depth of modula-
			tion.
Phaser Reso-		0–127	Specifies the amount of feed-
nance			back for the phaser.
			Higher settings will give the
			sound a stronger character.
Phaser Mix Lev-		0–127	Specifies the volume of the
el			phase-shifted sound, relative to
			the direct sound.
Delay Time		0–1300 ms, note	Adjusts the delay time from the
			direct sound until the each delay
			sound is heard.
Fbk Dly Time		0–1300 ms, note	Adjusts the delay time for the
			feedback sound.
Dly Time Dev		0–1300 ms, note	Specifies the differences in delay
			time for each of the delay
			sounds.
Delay Level		0–127	Adjusts the volume of each de-
			lay sound.
Delay Feedback		-98– +98 %	Adjusts the proportion of the de-
#1			lay sound that is fed back into
			the effect. Negative (-) settings
			will invert the phase.
Delay Pan Type		1–10	Specifies the pan of each delay
			sound.
			Ten settings are provided as var-
			ious panning combinations of
			the delay sounds (see below).
BPF 1–5 Freq		50–20000 Hz	Sets the center frequency for
			each band pass filter (1–5).
BPF 1/2 Q		0.3–24.0	Specify the output bandwidth
			for each band pass filter (1-5).
BPF 3/4/5 Q
Balance #2		DRY100:0WET–	Volume balance between the di-
		DRY0:100WET	rect sound (DRY) and the delay
			sound (WET)
Delay Pan Type
Values	Dly 1	Dly 2	Dly 3	Dly 4	Dly 5
1	L63	L32	0	32R	63R
2	L63	32R	L32	63R	0
3	L63	63R	L32	32R	0

L

Phaser

R

1	BPF 1
2	BPF 2
3	BPF 3
4	BPF 4
5	BPF 5

Delay

1

2

3

4

5

4	32R	L32	L63	0	63R
5	63R	0	L63	L32	32R
6	L32	32R	L63	63R	0
7	0	63R	L63	32R	L32
8	0	63R	L32	32R	L63
9	0	32R	L32	63R	L63
10	63R	32R	0	L32	L63

124