Roland V-Synth owner manual Analog Phaser, Digital Phaser, 128, 4STAGE, 8STAGE

Effects List

23: Analog Phaser

This effect features two analog-type phasers arranged in parallel,

making it stereo compatible. The sound as it cyclically drifts in and

out of phase is added to the source sound, creating the modulation

with the characteristic of phasers.

L

Analog

Phaser

R

Parameter	Value	Description
Shift Mode	4STAGE,	Sets the number of stages in the
	8STAGE	phase shift circuit (four (4STAG)
		or eight (8STAGE)).
		Setting this to eight stages
		(8STAGE) increases the number
		of the frequency points that
		sound is canceled, giving a
		sharper effect.
	Level	4 stage
			Freq.
	Level
		8 stage
			Freq.
Center Freq #1	0–127	Sets the center frequency to
		which the phaser effect is ap-
		plied.
		Increasing this value moves the
		effect point of the phaser into
		higher frequency ranges.
Resonance	0–127	Amount of feedback
		Increasing this value gives a
		more distinctive sound to the ef-
		fect.
LFO 1/2 Rate	0.02–5.00 Hz,	Sets the rate of the swelling
	note	sound.
LFO 1/2 Depth	0–127	Specifies the depth of modula-
		tion.
LFO 1/2 Phase	NORM, INV	Sets the phase of both left and
		right swelling.
		NORM: The left and right phase
		will be the same.
		INV: The left and right phase
		will be opposite.

24: Digital Phaser

Phaser is an effect that adds a phase-shifted sound to the original

sound to create time-varying change, modulating the sound.

L		2-Band
	Phaser
R		EQ

Parameter	Value	Description
Shift Mode	4STAGE,	Sets the number of stages in the
	8STAGE	phase shift circuit (four (4STAG)
		or eight (8STAGE)).
		Setting this to eight stages
		(8STAGE) increases the number
		of the frequency points that
		sound is canceled, giving a
		sharper effect.
	Level	4 stage
			Freq.
	Level
		8 stage
			Freq.
Manual	0–127	Specifies the center frequency at
		which the sound is modulated.
Rate #1	0.05–10.0 Hz,	Specifies the frequency of mod-
	note	ulation.
Depth #2	0–127	Specifies the depth of modula-
		tion.
Phase	NORM, INV	Sets the phase of both left and
		right swelling.
		NORM: The left and right phase
		will be the same.
		INV: The left and right phase
		will be opposite.
Resonance	0–127	Specifies the amount of feed-
		back for the phaser.
		Higher settings will give the
		sound a stronger character.
Mix Level	0–127	Volume of the phase-shifted
		sound, relative to the direct
		sound
Ps Low Freq	50–4000 Hz	Frequency of the low range
Ps Low Gain	-15– +15 dB	Gain of the low range
Ps Hi Freq	2000–20000 Hz	Frequency of the high range
Ps Hi Gain	-15– +15 dB	Gain of the high range

128