Roland V-Synth owner manual Formant PCM

Formant (PCM)

fig.03-18_50

The parameters of this screen are ignored when the Vari switch (p. 42) is off and when the Encode Type (p. 70) is “BACKING” or “ENSEMBLE.”

Formant ★◆

This sets the range of change in vocal quality (formant). Value: -63– +63

Formant KF (Formant Key Follow)

Specifies the amount by which the formant value will be affected by the key you play.

Value: -200– +200

Energy

Specifies how much the fundamental pitch will be emphasized in order to make the sound more well-defined. Set this to “OFF” if you do not want to use the Energy parameter.

Value: OFF, 1–127

Fmt LFO Depth (Formant LFO Depth) ★◆

Specifies how deeply the LFO will affect formant.

Value: -63– +63

In this screen you can make settings for the envelope that affects the formant. For details on envelope settings, refer to “Making Envelope Settings” (p. 48).

Creating a Patch

OSC TVA

fig.03-19_50

Level ★◆

Specifies the volume of the oscillator.

Value: 0–127

Level KF (Level Key Follow)

Use this parameter if you want the volume of the oscillator to change according to the key that is pressed. Relative to the volume at the C4 key (center C), positive (+) settings will cause the volume to rise for notes higher than C4, and negative (-) settings will cause the volume to fall for notes higher than C4. Larger settings will produce greater change.

Value: -200– +200

Level LFO Dp (Level LFO Depth) ★

Specifies how deeply the LFO will affect the volume of the oscillator. Value: -63– +63

In this screen you can make settings for the envelope that affects the sub TVA. For details on envelope settings, refer to “Making Envelope Settings” (p. 48).

LFO

fig.03-20_50

In this screen you can make settings for the LFO that affects the oscillator. For details on LFO settings, refer to “Making LFO Settings” (p. 49).

Creating a Patch

45