Samsung SCX-6555N Series manual Understanding the Keyboard, Using the SetIP program

For example, if you want to change the default setting of the brightness

& darkness for a copy job, press Copy > Darkness and adjust the brightness & darkness.

6.Press OK.

Using the SetIP program

This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. Especially, it helps the network administrator set several network IPs at the same time.

The following procedure is based on windows XP. If you use Macintosh or Linux OS, see Software section

• You can only use SetIP program when your machine is connected to a network.

•The following procedure is based on the Windows XP operating system. If you are using Macintosh or Linux, See Software section.

•If you are in a non-static IP address environment and need to setup a DHCP network protocol, go to the http:// developer.apple.com/networking/bonjour/download/, select the program Bonjour for Windows due to your computer operating system, and install the program. This program will allow you to fix the network parameter automatically. Follow the instruction in the installation window. This Bonjour program does not support Linux

•You can only use IPv4 setting for SetIP.

Installing the program

1.Insert the driver CD provided along with your machine. When the driver CD runs automatically, close the window.

2.Start Windows Explorer and open the X drive. (X represents the name of your CD-ROM drive.)

3.Double-clickApplication > SetIP.

4.Open the folder of the language you plan to use.

5.Double-click Setup.exe to install this program.

6.Follow the onscreen instructions to complete the installation.

Setting network values

1.Print the machine’s network configuration report to find your machine’s MAC address. (See "Printing a report" on page 90.)

2.From the Windows Start menu, select All Programs > Samsung Network Printer Utilities > SetIP.

3.Click to open the TCP/IP configuration window.

4.Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply.

When you enter the MAC address, enter it without a colon(:).

5.Click OK, and then the machine prints the network information. Check all the settings are correct.

6.Click Exit.

UNDERSTANDING THE KEYBOARD

You can enter alphabet characters, numbers, or special symbols using the keyboard on the touch screen. This keyboard is specially arranged like a normal keyboard for better usability for the user.

Touch the input area where you need to enter characters and the keyboard pops up on the screen. The keyboard below is the default showing the lowercase letters.

1	Left/Right	Moves the cursor between characters in the input
		area.
2	Backspace	Deletes the character on the left side of the
		cursor.
3	Delete	Deletes the character on the right side of the
		cursor.
4	Clear	Deletes all characters in the input area.
5	Input area	Enters letters within this line.
6	Shift	Toggles between lowercase keys and uppercase
		keys or vice versa.
7	Symbols	Switches from the alphanumeric keyboard to the
		symbol keyboard.
8	Space	Enters a blank between characters.
9	OK	Saves and closes input result.
10	Cancel	Cancels and closes input result.

If you enter the email address, then the keyboard for email pops up. After you enter the address, press OK to activate entered address. Press the arrow key on the side for rotating between From, To, Cc, Bcc, Subject, Message in order.

30 _Getting Started