Samsung SCX-6555N Series Media sizes supported in each mode, Guidelines for special print media

Media sizes supported in each mode

MODE	SIZE		SOURCE
Copy mode	Letter, A4, Legal,	•	tray 1
	Oficio, Folio,	•	optional tray 2
	Executive, JIS B5, A5,	•	multi-purpose tray
	A6	•	high capacity feeder
Single side printing	All sizes supported by	•	tray 1
	the machine	•	optional tray
		• multi-purpose tray
		•	high capacity feeder
Duplex printinga	Letter, A4, Legal, Folio,	•	tray 1
	Oficio, JIS B5, ISO B5,	•	optional tray
	Executive, A5,	•	multi-purpose tray
	Statement	•	high capacity feeder
Fax modeb	Letter, A4, Legal	•	tray 1
		•	optional tray
		•	high capacity feeder

a. 75 to 90 g/m2 (20 ~ 24 lb) only

b. Only the optional fax kit is installed.

Guidelines for special print media

MEDIA TYPE		GUIDELINES
Envelopes	• Successful printing on envelopes depends upon the
	quality of the envelopes. When selecting envelopes,
	consider the following factors:
	-	Weight: The weight of the envelope paper should
		not exceed 90 g/m2 or jamming may occur.
	-	Construction: Prior to printing, envelopes should
		lie flat with less than 6 mm curl, and should not
		contain air.
	-	Condition: Envelopes should not be wrinkled,
		nicked, or otherwise damaged.
	-	Temperature: You should use envelopes that are
		compatible with the heat and pressure of the
		machine during operation.
	• Use only well-constructed envelopes with sharp and
	well creased folds.
	• Do not use stamped envelopes.
	• Do not use envelopes with clasps, snaps, windows,
	coated lining, self-adhesive seals, or other synthetic
	materials.
	• Do not use damaged or poorly made envelopes.
	• Be sure the seam at both ends of the envelope
	extends all the way to the corner of the envelope.

1	Acceptable
2	Unacceptable

•Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the machine’s fusing temperature for 0.1 second. Check your machine’s specification to view the fusing temperature, see page see "General specifications" on page 124. The extra flaps and strips might cause wrinkling, creasing, or jams, and may even damage the fuser.

•For the best print quality, position margins no closer than 15 mm from the edges of the envelope.

•Avoid printing over the area where the envelope’s seams meet.

34 _Loading originals and print media