Savin 2045 appendix Mail Information Language, Job Reset Time in Adding Original, Original Setting

Preparations for Use as a Network Scanner

❒When [No] is selected, the e-mail is not sent if its size exceeds the limit, and an error message ap- pears. The scanned data is dis- carded.

❒Set the maximum e-mail size within the capacity of the SMTP

2 server.

❖E-mail Information Language

Select a language for E-mail Infor- mation Language with which Title, Document name, Sender's name and others are sent.

Select one of the following 18 lan- guages: British English, American English, German, French, Italian, Spanish, Dutch, Portuguese, Polish, Czech, Swedish, Finnish, Hungarian, Norwegian, Danish, Japanese, Simplified Chinese, and Traditional Chinese.

Note

❒The e-mail text is a template and cannot be changed.

❖Job Reset Time in Adding Original

When SADF mode is specified, se- lect whether or not the machine waits for another original to be set after all originals in the Auto Doc- ument Feeder (ADF) or on the ex- posure glass have been scanned.

Note

❒If either of SADF mode and Batch mode is not specified when scanning, this setting be- comes invalid and scanning op- eration is completed before placing originals.

•If [Off] is selected, the count- down does not occur and the machine enters the waiting state when all originals in the ADF have been scanned in SADF mode or Batch mode until an- other original is inserted or the {#} key is pressed.

•If [On] is selected, enter the number of seconds (3 to 900) for the Job Reset Time in Adding Original with the number keys. When an original is placed with- in this time, it is scanned as part of the same document as the previously scanned originals. However, when Batch mode is specified, the waiting state is kept regardless of the setting time until another original is in- serted or the {#} key is pressed.

❖Original Setting

Set the default for whether origi- nals are one-sided or two-sided and if two-sided, the relationship between those sides. When the originals are always the same, set this for the default to make opera- tion easier. You can select “1 Sided Original”, “2 Sided Orig.: T to T” (Top to Top), or “2 Sided Orig.: T to B” (Top to Bottom).

Reference

p.35 “Original Orientation and Scan Area”

❖Original Orientation Priority

Select the default for original placement orientation. When orig- inals are always positioned the same way, select that orientation as the default to make operation easier.

Reference

p.35 “Original Orientation and Scan Area”

18