Using the Network Delivery Scanner Function

Screen Configuration

The screen configuration when using the machine as a network delivery scanner is as shown.

1

2

3

4

5

6

7

5

1. Network Delivery Scanner Icon

 

 

( )

This icon shows that the screen for net- work delivery scanner function is dis- played.

2.Destination Field

The selected destination is shown here. If multiple destinations are selected, the destinations are displayed in the order they were selected by pressing [UPrev.] or [TNext].

Note

Pressing the {Check Modes} key lets you check the selected destinations.

3.[Registration No.]

Press this button to specify a destination using a five-digit short ID number.

4.[Manual Input]

When specifying a destination that is not listed, press [Manual Input], and then enter the destination with the soft keyboard that is displayed. For information about sending e-mail from the delivery server, see the manual for ScanRouter V2. See p.i “Manuals for This Machine”.

5.[Attach Sender's Name] [Attach Sub- ject]

Set the sender and subject of the docu- ment to be delivered.

6 . [ ] Switch Destination List/Search

Press this button to switch a destination list from the delivery server to the desti- nation list of this machine or to search by user name.

7.Destination List

Displays the destinations programmed in the delivery server or this machine.

Note

When the entire list does not fit on one screen, [U] or [T] can be used to scroll through the display.

Group destinations are denoted by this symbol ().

A bar above a title indicates that a des- tination that belongs to it has been se- lected.

52

Page 58
Image 58
Savin 2045 appendix Network Delivery Scanner Icon, Attach Senders Name Attach Sub- ject, Switch Destination List/Search