Sending Stored Scan Data by E-mail
46
4
Note
If a password has been set, a
screen for entering the pass-
word appears after selecting
the sender. Enter the pass-
word, and then press [OK].
After verification of the pass-
word, the sender name is dis-
played.
CFor a reception confirmation e-
mail, press [Return Receipt].
Note
When [Return Receipt] is se-
lected, an e-mail notifying
that the e-mail has been read
by the destination party is
sent to the sender selected
here. However, if the mailing
software used by the destina-
tion party does not support
MDN (Message Disposition
Notification), the setting in
[Return Receipt] becomes
invalid.
DPress [OK].
Searching for a sender to select
APress [Attach Sender's Name].
BPress [].
CPress [Srch.by Dest.Name/Index].
To search using e-mail address-
es, press [Search by E-mail].
The soft keyboard is displayed
for entering a destination name.
DEnter part of the sender name.
Note
Enter the first character or
characters of the sender
name.
It is also possible to perform
a combined search using
[Srch.by Dest.Name/Index] and
[Search by E-mail].
It is necessary for searching
to discriminate uppercase
and lowercase letters.
Reference
For information about how
to enter characters, see Gener-
al Settings Guide.
EPress [OK].
FSelect the sender.