Preparations for Use as a Network Scanner
22
2
Installing Software
The machine comes with two CD-ROMs containing various software.
The CD-ROM labeled Scanner Driver & Document Management Utilities con-
tains the necessary software to use the machine as a network scanner. The CD-
ROM labeled Printer Driver & Utilities contains the necessary software to use
the machine as a printer.
This section explains the software contained on the Scanner Driver & Docu-
ment Management Utilities CD-ROM.
Reference
For information about the software contained on the Printer Driver & Utili-
ties CD-ROM, see Printer Reference.

Auto Run Program

When the CD-ROM is inserted into a computer in Windows 95/98/Me, Win-
dows XP, Windows 2000, or Windows NT 4.0, the installer starts automatically
(Auto Run) to install the TWAIN driver and various software.
Note
Auto Run might not automatically work with certain operating system set-
tings. In this case, launch Set up.exe located in the CD-ROM root directory.
If you want to install the software without using Auto Run, hold down the
{
{{
{Shift}
}}
} key while inserting the CD-ROM. Keep the {
{{
{Shift}
}}
} key held down until
the computer has finished accessing the CD-ROM.
If [Cancel] is pressed during installation, the installation will be stopped and
all the remaining software will not be installed. If [Cancel] has been pressed,
reinstall the remaining software after restarting the computer.
Limitation
For installation in Windows 2000, Windows XP, or Windows NT 4.0, log on
as a member of the administrators group.