Siemens S120 configurationmanual With connectors not in the case of motors with single cores

Description of the motor 2.2 Technical features

Technical feature	Version
Cooling method	Water cooling:
	Jacket cooling, size 1FW609, 1FW613, 1FW615
	Integrated cooling, size 1FW616, 1FW619, 1FW623, 1FW629
Pressure in the cooling circuit	Max. 10 bar (static)
Cooler connection	Motors with a cooling jacket:
	Must be connected by customer
	Motors with integrated cooling:
	Connection with/without cooling connection adapter (see
	"Installing the motor")
Temperature sensor	2 x PTC thermistor triplet with response threshold +130 /150 °C
	(to DIN 44081/44082) and 1 x KTY84 thermistor (to EN 60034-
	11) in the stator.
Insulation of stator winding	Temperature class 155 (F)
according to EN 60034-1
Magnet material	Rare earth material
Connection, electrical	Cable outlet:
	Axial
	radial outward
	tangential (not in the case of motors with single cores)
	Connection type:
	Permanently connected power and signal cables with open core
	ends
	Length: 2 m
	Permanently connected power cables with single cores and
	signal cables with open core ends
	Length: 1 m
	Permanently connected power and signal cables pre-assembled
	with connectors (not in the case of motors with single cores)
	Length: 0.5 m
Motor supply cables	For the specifications of the motor supply cables, see
	"Interfaces".
Torque ripple	≤ 1.5% M0

Ambient conditions for long-term storage, transport, and use in fixed locations

Based on DIN EN 60721-3-1 (for long-term storage), DIN EN 60721-3-2 (for transport), and DIN EN 60721-3-3 (for use in fixed, weather-protected locations)

Table 2- 2	Climatic ambient conditions
Lower air temperature limit:		- 5 °C
Upper air temperature limit:		+ 40 °C (deviates from 3K5)
Lower relative humidity limit:		5 %
Upper relative humidity limit:		85 %
Rate of temperature fluctuations:		< 0.5 K/min
Condensation:		Not permissible
Formation of ice:		Not permissible
26		1FW6 Built-in torque motors
		Configuration Manual, 05/2009, 6SN1197-0AE00-0BP3