General safety guidelines 1.5 Electrical shock hazard!
1.5Electrical shock hazard!
DANGER
Electrical shock hazard! When an installed torque motor rotates, potentially dangerous voltages are induced at the cable ends of the motor.
Insulate terminals and leads in open cable ends or take measures to prevent torque motors that have been installed from rotating.
There is also a risk of compression.
DANGER
Danger due to high leakage currents
If high leakage currents are present, more stringent requirements may apply to the PE conductor. Warning signs may also be required on the PDS. You can find more detailed information in the standard EN
Protective measures against residual voltages
DANGER
There is a shock hazard danger due to the residual voltages at the motor terminals!
When the power supply voltage is
1.6Attaching warning signs
All danger areas must be identified by well visible warning and prohibiting signs (pictograms) in the immediate vicinity of the danger. The associated texts must be available in the language of the country in which the product is used.
20 | 1FW6 |
Configuration Manual, 05/2009, |