Siemens S120 configurationmanual Ordering examples, Example

Description of the motor 2.4 Order designation

Note

If, for design reasons, only individual components can be installed (stator and rotor separately), these can be ordered and shipped separately.

DANGER

Due to the risk of compression caused by the attractive forces of the rotor, an installation device must be provided by the customer when the stator and rotor are installed separately.

2.4.9Ordering examples

Example 1:

Stator and rotor preassembled with transportation locks; cooling jacket; axial cable outlet for SINAMICS S120 drive system, Motor Modules 18 A / 36 A:

MLFB 1FW6090–0PB15–1JC2

Example 2:

Stator and rotor preassembled with transportation locks; integrated cooling; radial cable outlet towards the outside for SINAMICS S120 drive system, Motor Modules 18 A / 36 A:

MLFB 1FW6190–0VB07–1JC2

Example 3:

Cooling connection adapter (axial/radial) for sizes 1FW616, 1FW619, and 1FW623:

MLFB 1FW6160–1BA00–0AA0

Example 4:

Individual component/stator as spare part: MLFB 1FW6190–8VB07–1JD2

Individual component/rotor as spare part: MLFB 1FW6190–8RA07–0AA0

Individual component/round sealing ring as spare part MLFB 1FW6090–1EA00–0AA0 (for size 1FW609)

1FW6 Built-in torque motors	39
Configuration Manual, 05/2009, 6SN1197-0AE00-0BP3