Environmental compatibility | 13 |
13.1Environmental compatibility during production
●There is no need to transport hazardous materials.
●The packaging material is made primarily from cardboard.
●Energy consumption during production was optimized.
●Production has low emission levels.
13.2Disposal
The product must be disposed of in the normal recycling process in compliance with national and local regulations.
13.2.1Guidelines for disposal
DANGER
Death, serious bodily injury and/or property damage may result from improper disposal of direct drives or their components (especially components with permanent magnets).
Direct drives or their components must be disposed of properly.
Main constituents of a proper disposal procedure
●Complete demagnetization of the components that contain permanent magnets
●Components that are to be recycled should be separated into:
–Electronics scrap (e.g. encoder electronics, sensor modules)
–Electrical scrap (e.g. laminated cores, motor windings, cables)
–Iron to be recycled
–Aluminum
–Insulating materials
●No mixing with solvents, cold cleaning agents, or remains of paint, for example
1FW6 | 173 |
Configuration Manual, 05/2009, |
