First steps
3.2 Description of the user interface
ASIMON V3 - Configuration software for AS-Interface safety monitor
Programming and Operating Manual, Edition 09/2008, GWA 4NEB 333 1558 02 DS 02 31
• With the keyboard:
- with the <Tab> key: change window areas.
- with the arrow keys: select circuit, device or position.
- execute actions using the following keyboard commands:
<Ctrl> + <D> = Activate/Deactivate
<Ctrl> + <I> = Invert
<Delete> = Delete
<Ctrl> + <C> = Select
<Ctrl> + <V> = Paste
<Shift> + <Ctrl> + <V>= Move
<Ctrl> + <A> = Assign
<Ctrl> + <R> = Replace
In addition to the devices themselves, you can also change the connection lines of the devices
(and thus the device assignment).
Figure 3-15 Device assignment by creating/moving connection lines
Note
If a monitoring device from an OSSD is to be assigned to a link in a new (non-OSSD window),
the link must first be created. After creating the link, select the monitoring device in the OSSD
(<Ctrl> + <C>) and assign it to the logic device in the new window (click the logic device and
press <Ctrl> + <A>).