Connecting Headsets

Plantronics Wireless Headset

The headset power is automatically turned off by Net Phone whenever a call is not active and automatically restored upon receiving a call to save talk time battery.

The speech volume (listening) can be adjusted on the headset as well as on Net Phone, and the microphone volume (talking) can be easily adjusted in Net Phone.

Please refer to Plantronics User’s Guides for installation, setup, battery changing and other items for operating your Wireless Headset.

Installation

The software modules needed for Plantronics are installed automatically with the Net Phone installation. All configuration information for Plantronics to work properly is part of this installation.

We recommend not running the Plantronics PerSonoCall application -- disable the option to “Launch PerSonoCall whenever Windows starts,” and shut down the application.

If you are running the Plantronics PerSonoCall, always disable the option: “Enable headset only for phone calls (extends battery life).”

Note Plug in the headset USB cord and make the power connection for the base unit

Some PC USB ports provide enough power so that the external AC power transformer does not need to be used.

With Net Phone running, right-click the Audio/SPKR button to access the Audio Settings dialog box. Make the following settings:

Sound Board/Device:

USB Audio Device

The device for the headset

or CS50/CS60-USB Headset

 

 

Audio Device Type:

USB Headset

This activates the control

buttons on the headset.

 

 

84

Strata CIX Net Phone UG 04/08

Page 98
Image 98
Toshiba CIX100-S, CIX200 manual Installation