Toshiba CIX200, CIX100-S manual Docking Tab, Docking Settings

Net Phone Settings

Preferences

Docking Tab

The docking tab defines the contents of Net Phone when docked to the top or bottom of the screen. This includes whether docking is enabled or disabled, uses the slim or regular profile and a listing of contents by display priority (space limits what can be displayed).

•Enable Screen Docking – When enabled, the Net Phone will automatically ‘dock’ to the top or bottom of the PC screen when it is moved to the top or bottom.

Docking Settings

•Docked Profile – Once screen-docked the Net Phone will take on either a Slim or a Regular profile selected here.

•Enable ReDock on Startup – Place a check in the box to cause Net Phone to startup in the same position and condition as when it was last shut down.

•Used Elements – The displays, buttons, etc. to be used in each profile are configured by moving available elements to the “Used Elements” list. Whenever the Net Phone is screen docked, it will place the elements from the “Used Elements” list on its screen starting from the top of the list, using as many elements as possible until it runs out of space on the right side of the PC screen. Some types of elements can only be used once (like an “LCD”) whereas other elements (like “Programmable Keys”) can be used numerous times.

•Available Elements – The “Available Elements” list shows the types of elements that are available for use in this profile. Note: Once you’ve changed the screen- docking settings, the new settings will not be used until the Net Phone is ‘undocked’ (if it’s already screen-docked) and then re-docked.

Strata CIX Net Phone UG 04/08 25