Toshiba Single-phase 200V class 0.2 to 2.2kW +SS1+AD2, +SS2+AD2, +SS3+AD2, +SS4+AD2, Fchg, THR2

						E6581090
		■Table of input terminal functions 2
		Function	Code	Function		Action
		No.
		29	R+SS4	Combination of reverse run and preset	ON	: Simultaneous input of R and SS4
				speed command 4		commands
		30	F+SS1+AD2	Combination of forward run, preset	ON	: Simultaneous input of F, SS1 and
				speed command 1 and
						AD2 commands
				acceleration/deceleration 2
		31	R+SS1+AD2	Combination of reverse run, preset	ON	: Simultaneous input of R, SS1 and
				speed command 1 and
						AD2 commands
				acceleration/deceleration 2
				Combination of forward run, preset	ON	: Simultaneous input of F, SS2 and
		32	F+SS2+AD2	speed command 2 and
						AD2 commands
				acceleration/deceleration 2
		33	R+SS2+AD2	Combination of reverse run, preset	ON	: Simultaneous input of R, SS2 and
				speed command 2 and
						AD2 commands
				acceleration/deceleration 2
		34	F+SS3+AD2	Combination of forward run, preset	ON	: Simultaneous input of F, SS3 and
				speed command 3 and
						AD2 commands
				acceleration/deceleration 2
				Combination of reverse run, preset	ON	: Simultaneous input of R, SS3 and
		35	R+SS3+AD2	speed command 3 and
						AD2 commands
				acceleration/deceleration 2
		36	F+SS4+AD2	Combination of forward run, preset	ON	: Simultaneous input of F, SS4 and
				speed command 4 and
						AD2 commands
				acceleration/deceleration 2
		37	R+SS4+AD2	Combination of reverse run, preset	ON	: Simultaneous input of R, SS4 and
				speed command 4 and
						AD2 commands
				acceleration/deceleration 2
					Enabled if  = 4 (selectable
11
					between terminal board and operation
		38	FCHG	Frequency command forced switching	panel/internal potentiometer)
					ON	: VI terminal
					OFF : Internal potentiometer
					ON	: No.2 thermal (:, ,
		39	THR2	No.2 thermal switching		, , )
					OFF : No.1 thermal (: Setting, ,
						, , )
		40			ON	: No.2 motor (:0, ,
						, , , ,
			MCHG	No.2 motor switching		)
					OFF : No.1 motor (Pt: Setting, ,
						, , , ,
	*1					)
				Operation holding	ON	: F (forward run) / R (reverse run)
		49	HD			held, 3-wire operation
				(Stop of 3-wire operation)
					OFF : Slowdown stop
		54	FreeRun	Standby (inversion)	ON	: Free run
					OFF : Standby
		55	RSTN	Reset signal (inversion)	OFF to ON: Trip reset
		56	F+ST	Combination of forward run and standby	ON	: Simultaneous input of F and ST
				commands		commands
		57	R+ST	Combination of reverse run and standby	ON	: Simultaneous input of R and ST
				commands		commands

*1 This function is effective after software version V110.

K-10