Toshiba Three-phase 200V class 0.1 to 2.2kW, Single-phase 200V class 0.2 to 2.2kW Free notes 

E6581090

<Selective communications>

When an operation frequency command is sent from the host computer to No. 3 inverter

Host computer	: Cable route
	: Data (host to INV)
	: Answer-back data (INV to host)

＊		*		*		*	～～	*
INV		INV		INV		INV		INV		INV
No.00	Thrown away	No.01	Thrown away	No.02	Thrown away	No.03		No.29	Thrown away	No.30

Thrown away

	“Thrown away”: On receipt of data from the host computer, only inverters with
	specified ID numbers perform the specified operation, while all
6
	other inverters throw the data away and move to the ready state for
	receiving the next data.

*: Use terminal boards to branch cables.

①The host computer sends data to all inverters on the network.

②On receiving the data from the computer, each inverter checks the inverter ID number contained in it.

③Only the inverter with the specified ID number (No. 3 in this case) decodes the command and performs the specified operation.

④No. 3 inverter sends the processing results to the host computer, along with its ID number.

⑤Thus, only No. 3 inverter operates in response to the operation frequency command from the host computer.

6.16.2Free notes

H

: Free notes

• Function

This parameter allows you to specify an ID number for each inverter for management and maintenance purposes.

■Parameter setting

Title	Function		Adjustment range	Default setting
H	Free notes	0～65535		0

Note: Adjustment range of the above mention can set by the computer on the network. The operation panel can set to the maximum 9999.

F-30