Toshiba Single-phase 100V class 0.1 to 0.75kW, Single-phase 200V class 0.2 to 2.2kW

E6581090

■When using V1/S3 terminal as a logic input terminal (H : )

DC reactor＊6
(DCL: option)
2		P0 ＊5	PA	PC
MCCB	＊1				U/T1
R/L1						IM
S/L2		Main circuit			V/T2
T/L3					W/T3
	FLC	Control circuit		F		Forward
Fault output signal	FLB
	FLA			R		Reverse
		VF-nC1		S1		Preset speed 1
				S2		Preset speed 2
		Connector for		CC		Common
		optional devices
				P15
						＊4
			VI/S3 *2 *3			Preset
	FM/OUT＊2	CC		CC		speed 3
	＋
Frequency meter	Meter		Ry
(Ammeter)
	－

1-phase series

	MCCB
Power	R/L1
supply	S/L2

1-phase series do not have T/L3 terminal.

*1: Only European model has a built-in noise filter.

*2: The terminal can be switched between FM/OUT and VI/S3 by changing a parameter.

*3: The terminal can also be used as an input terminal by changing a parameter.

*4: To use VI/S3 terminal as an input terminal, P15 and VI/S3 must be short- circuited with a resistor (recommended resistance: 4.7kΩ-1/4W).

*5: European models are not provided with PO terminal.

*6: 1-phase 100V models cannot be used with DC reactors.

B-4