Toshiba Three-phase 200V class 0.1 to 2.2kW instruction manual How to set extended parameters

E6581090

4.1.3How to set extended parameters

The VF-nC1 has extended parameters to allow you to make full use of its functions. All extended parameters are expressed with H and three digits.

Basic parameter

H－－－

Press the MON key once and use the key and the key to select “H－－－“ from the basic parameters.

ENT

MON

	H～H
	H～H
	H～H
	H～H
	H～H
	H～H
	H～H
		4
	H～H
Press the key and the key to
select the parameter to be
changed. Then, press the ENTER
key to display the set parameter.

[Steps in key entry for extended parameters]

MON	: Switches to the setting monitor mode. (displays	CWJ)	★See 11.3 for the table of extended
	: Selects "H－－－" from basic parameters.		parameters.
ENT	: Displays the first extended parameter.
	: Selects the extended parameter to be changed.
ENT	: Reads the programmed parameter setting.
	: Changes the parameter setting.
ENT	: Saves the changed value of the extended parameter setting.
	Pressing the MON key instead of the ENT key moves back to the previous status.

D-5