Toshiba Single-phase 200V class 0.2 to 2.2kW VF-nC1, Standard connection diagram

E6581090

2.2.1Standard connection diagram (1)

This diagram shows a standard wiring of the main circuit.

(1) Sink <common: CC>

■When using V1/S3 terminal as an analog input terminal (H :  or )

DC reactor＊5	2
(DCL: option)

			P0 ＊4	PA	PC
MCCB	R/L1	＊1				U/T1	IM
	S/L2		Main circuit			V/T2
	T/L3					W/T3
		FLC	Control circuit		F		Forward
Fault output signal		FLB
		FLA			R		Reverse
		P5	VF-nC1		S1		Preset speed 1
External potentiometer					S2		Preset speed 2
(3-10kΩ)		VI/S3＊2	＊3
							Common
or input voltage signal			Connector for		CC
0-10Vdc		CC	optional devices
Current signal
4-20mAdc
		FM/OUT＊2	CC	P15
		＋
Frequency meter		Meter		Ry
(Ammeter)
		－

1-phase series

	MCCB
Power	R/L1
supply	S/L2

1-phase series do not have T/L3 terminal.

*1: Only European model has a built-in noise filter.

*2: The terminal can be switched between FM/OUT and VI/S3 by changing a parameter.

*3: The terminal can also be used as an input terminal by changing a parameter.

*4: European models are not provided with PO terminal.

*5: 1-phase 100V models cannot be used with DC reactors.

B-3