Visioneer XP 300, XP 200, XP 100 manual Folders pane is replaced by the Scan pane

122VISIONEER STROBE XP SCANNER USER’S GUIDE

The Folders pane is replaced by the Scan pane.

Scan pane

If this Scan button is not active, see the section on page 129 to setup your computer.

3.From the Scanner drop-down list, select TWAIN: Visioneer Strobe XP.

Note: Please wait a few moments for your selection from the drop- down list to become active. This delay only occurs the first time you select from the list while PaperPort initializes the scanner. Later on, the scanner initializes immediately when you select it from the list.

Note: If the Scan button at the bottom of panel is not available when you make a selection from the Scanner drop-down list, your computer needs to be setup to use the scanner. See the section, “Setting Up Your Scanner to Work with PaperPort” on page 131.