Install Omnipage PRO Strobe XP 300 only | Visioneer XP 200 instruction

INSTALL OMNIPAGE PRO (STROBE XP 300 ONLY) 29

INSTALL OMNIPAGE PRO (STROBE XP 300 ONLY)

Both CDs that you may have received contain additional software for your scanner:

■Disc 1 contains a version of Adobe Acrobat Reader

■Disc 2 contains the OmniPage Pro software

Note: OmniPage is required for your scanner to have its full range of features. Please make sure to install OmniPage Pro before scanning.

1.Make sure the Disc 1 Installation CD is removed from your computer’s CD-ROM drive, and then insert Disc 2 into the drive.

The menu for the CD automatically opens.

If the menu does not automatically open, see the troubleshooting steps in the note on page 14.

2.Select OmniPage Pro to install.

3.Follow the instructions on the screen.

4.When installation is finished, remove Disc 2 and store it in a safe place.

5.If you want to install other software from Disc 1, re-insert it into the CD-ROM drive now.